Similarly when the SG3525 outputs are fed to another driver or IGBT, VC must be selected accordingly. Care must be taken to ensure that the maximum VGS breakdown voltage of the MOSFET is not crossed. Vampire: the masquerade - coteries of new york soundtrack cracker barrel. So, I used a 36v zener and as for turns ratio, (Primary 26 turns of 1.7mm. The only difference is that I adjusted the circuit for +36/-36 volts. I built it using the exact same parts written in the schematic.
Hello everyone, I made a 50Khz SMPS using the schematic I have attached to my message.
